Kitchen Hand Free Automatic Soap Dispenser

$27.95
  • Kitchen Hand Free Automatic Soap Dispenser
  • Kitchen Hand Free Automatic Soap Dispenser
  • Kitchen Hand Free Automatic Soap Dispenser
  • Kitchen Hand Free Automatic Soap Dispenser
  • Kitchen Hand Free Automatic Soap Dispenser
  • Kitchen Hand Free Automatic Soap Dispenser
  • Kitchen Hand Free Automatic Soap Dispenser
  • Kitchen Hand Free Automatic Soap Dispenser

Kitchen Hand Free Automatic Soap Dispenser

$27.95

Touchless Bathroom Liquid Soap Dispenser Smart Sensor Dispenser Kitchen Hand Free Automatic Soap Dispenser


Specifications
Effective Sensing Distance:3-5cm
Rated Voltage:6V
Rated Current:200-300mA
Battery Type:4xAAA
Working Teamperature:5℃-50℃
Product Weight:268g
Container Capacity:450ml

Packing List
Automatic Soap DispenserX1,Measuring Cup X1,User ManualX1

P1-1


Key Feature
1.Motion sensor detects motion to dispenser form in 0.25S
2.Low power consumption allows for long term usage with out frequent battery changes.
3.Diepensesthick,bubbly form for easy washing.
4.Twist—to—remove bottom for easy refills
5.Prevent Splashing design.
​6.Accomdates soap—to—water ratio 1:6.
Adjust The Dispensing Amount
There are 2 levels of Dispensing Amount,including 0.8g in 0.6 second and 1.6g in 1.2 seconds.You can press and hold the Power Button for 5 seconds to swich the levels.

p2


p5
P7


Maintenance and care
1.Place the dispenser on the flat and stable surface.
2.Always keep the dispenser straight and upright.
3.Gently clean the dispenser with a dry towel.
4.Remove all batteries from the product if not used for a extended period of the time.

p1
P3
p4


Install Batteries
Step 1
Counterclockwise rotate and separate the Dispenser Body form the soap dispenser.
Step 2
Gently pry the Battery Cover up from both sides,the install 4 pieces of AAA batteries(Not included) int the Battery Slots,Make sure that the polarities(+and—)match the polarities indicated on the top of the Battery Slot.
Note:The pole that the battery is placed upwards should be consistent with the icon on the top of Battery Slot.
Step 3
Insert the protruding part of teh Battery Cover into the fixed hole,then press down both ends until you hear two times of "click",While indicates the Battery Cover is firmly attached to the Battery Slot.
Fill with the Liquid Soap
Step 1
Mix the liquid soap ,and water with a ratio of 1:2 to 1:10,then fill them in the soap container.
Notes:
1.Foaming liquid soap can be filled in the soap container directly.
2.Please be careful not to overfill the soap container.
Step 2
Clockwise rotate the Dispenser Body and assemble it with the soap container tightly.

p6